3% Off orders over £200 - Code SAVER3
5% Off orders over £400 - Code SAVER5
10% Off orders over £750 - Code SAVER10
German engineered construction board manufactured to the highest possible standards according to EN 13164. Can be covered directly with underfloor heating, tiles, plaster or render.
Floorheatpro Premium Tilebacker boards are German made exclusively by JACKON Insulation - Bulk Discount
6mm cement finish tile backer insulation board, Each board measures 1200mm x 600mm x 6mm - Minimum order 5 boards = 3.6sqm
Premium tile backer board produced in Germany to high standards and designed for under tile heating systems. Apply and bond directly to concrete or screed floors using a rapid set flexible tile adhesive or screw to wooden floors using the fixing washers specifically designed for the purpose.
Floorheatpro cement finished tilebacker boards each measure 1200mm x 600mm and each board covers an area of 0.72m². For example 10 boards = 7.2m² of insulation board.
When estimating the number of boards required it is always a good idea to add 5% to 10% more than the floor area you want to cover in order to allow for wastage when cutting the boards.
The insulation board must always cover all of the free floor area available in the room and not just the area covered by the actual heating.
Bathrooms and kitchens have permanent footprints such as showers, units, islands, baths and toilets, so it is important to decide at this stage whether the insulation will also need to go under these permanent fittings and if so allow for the extra coverage in your calculation.
Area Coverage (m2) | Number of boards |
1 | 2 |
2 | 4 |
3 | 5 |
4 | 7 |
5 | 8 |
6 | 9 |
7 | 11 |
8 | 13 |
9 | 14 |
10 | 16 |
11 | 18 |
12 | 18 |
13 | 20 |
14 | 21 |
15 | 23 |
16 | 25 |
17 | 26 |
18 | 28 |
19 | 29 |
Below is the technical specification for Jackon insulation board.
Technical Data:Properties | Standard | Unit | XPS core |
Bulk density | EN 1602 | kg/m3 | >30 |
Thermal conductivity (ageing process without gas-tight lamination) | EN 13164 | W/(m·K) | 0,036 |
Compressive strength and/or compressive stress at 10 % compression | EN 826 | N/mm2 | >0,25 |
Change in dimension under defined conditions- 70°C temperature 90% relative humidity | EN 1604 | % | ≤5 |
Vapour diffusion resistance factor µ (dependent on the thickness) | EN 12086 | 200–60 | |
Water absorption on long-term immersion | EN 12087 | % | ≤1 |
Linear thermal expansion coefficient | - | mm/(m·K) | 0,07 |
Fire behaviour | EN 13501-1 | Class | Euroclass E |
Working temperature | °C | -50/+75 |
Below is a link to our full Specification guide, please click the link and it will open in a new tab to allow you to download or read online.
Specification PDF guideItems ordered before 2pm on any working day (Monday to Friday) excluding Bank Holidays will be delivered to UK mainland addresses next working day (excluding Saturday, anytime up to 5pm to the delivery address given. Special deliveries such as before noon or 10am etc will be charged extra and arrive by the designated time next working day (Monday to Friday) excluding Bank Holidays. Saturday deliveries will be made on a Saturday morning at an extra charge.
Next working day UK only | Before 10AM UK only | Saturday UK only | Eire | Scotland highlands, isle of man / white, northern ireland |
Any time up to 5pm | before 10AM | before 12AM | 2 day service | 2 day service |
FREE | £18.00 | £20.00 | £26.00 | £22.00 |
Our inclusive free delivery excludes special deliveries as above and also the Channel Islands & Eire. Delivery to the Channel Islands and Eire can be arranged at agreed rates.
Friday orders taken before 2pm will be delivered the following Monday (excluding Bank Holidays), unless the option to deliver Saturday AM has been selected.
We use the services of reputable couriers and always endevour to deliver by the appointed time on the appointed day. Unfortunately, the couriers on rare occasions fail to deliver on the appointed day or time. This is a rare occurence but because it does happen occasionally, the Seller cannot be held responsible for the late delivery of the Goods, and any costs incurred by the Buyer and tradesmen unable to work. We advise the Buyer to ensure receipt of the Goods before scheduling the work for any trades associated with the Goods.
Delivery of the Goods shall be made to the Buyer's address specified in the order and the Buyer shall make all the arrangements necessary to take delivery of the Goods whenever they are tendered for delivery.
Pallet orders are delivered within 2 to 3 days.
The Buyer agrees that Proof of Delivery provided to the Seller by the courier is sufficient evidence to establish that the Goods have been received by the Seller.
Deliveries must be signed for as proof of receipt unless, (before the Goods are despatched), the Buyer has given written permission for the Goods to be left without a signature - this written permission removes the liability for the Goods from the courier or Floorheatpro after delivery of the Goods.
Title and risk in the Goods shall pass to the Buyer upon delivery of the Goods.
The Price Match Promise is the Floorheatpro way of saying you will always receive the best deal possible for your underfloor heating system.
We believe in keeping it simple so all our sales prices are genuine to match all rivals.
The only condition we make is the material being compared is of the same quality and has recognised international approvals such as UL (U.S.A.), SEMKO (Sweden) and FIMKO (Finland).
It is important to maintain the highest standards and with the supply base for underfloor heating increasing and sources from many different parts of the world, we can see some materials on the market that are new with a short track record and without the necessary approvals.