3% Off orders over £200 - Code SAVER3
5% Off orders over £400 - Code SAVER5
10% Off orders over £750 - Code SAVER10
Cable circuit monitor - assists the installer during installation.
When the Cable Circuit Monitor is connected to the terminations of your heating mat or cable, the CCM will automatically sound the alarm if the cable is accidently cut or damaged.
The heating elements are tough, but they could be damaged on the jobsite. We recommend the Screamer to monitor your mats during every installation step.
The Screamer will immediately warn you in the event of damage. If the alarm sounds, stop work, check the mat and test electrically.
1. Open the battery compartment and make sure the batteries are installed in the correct polarity as shown in the battery compartment.
2. Replace the battery compartment cover and switch the unit “ON”.
3. The alarm should sound when you switch the unit “ON” and both the Red and Green lights will be “ON”. If these things do not occur, inspect the battery connections or replace the batteries.
4. During normal use and with the mat terminations connected (see table for variations - the most common connection is L1, L2 & E), the Red light will be “OFF”. Should the Green light go out, replace the batteries before continuing work.Operation:
Make sure the heating mats or cables to be monitored are not connected to a mains power source.
Connect the mat or cable terminations at the beginning of your project to test for faults.
The Screamer is designed to monitor the mats or cables individually.
1. When you have made the connections switch to the “ON” position.
2. Only the Green light should be “ON”.
3. Hang or place the Screamer where it can be seen and heard during the installation.
4. When both the Red light and Green light are both “ON” and the alarm sounds this indicates a wire has come loose from the terminals or damage has occurred to your product.Alarm Table:
"X" indicates alarm
|Terminals Connected||Short Circuit||Open Circuit|
|E &L1, L2||X||N/A|
Items ordered before 2pm on any working day (Monday to Friday) excluding Bank Holidays will be delivered to UK mainland addresses next working day (excluding Saturday, anytime up to 5pm to the delivery address given. Special deliveries such as before noon or 10am etc will be charged extra and arrive by the designated time next working day (Monday to Friday) excluding Bank Holidays. Saturday deliveries will be made on a Saturday morning at an extra charge.
|Next working day UK only||Before 10AM UK only||Saturday UK only||Eire||Scotland highlands, isle of man / white, northern ireland|
|Any time up to 5pm||before 10AM||before 12AM||2 day service||2 day service|
Our inclusive free delivery excludes special deliveries as above and also the Channel Islands & Eire. Delivery to the Channel Islands and Eire can be arranged at agreed rates.
Friday orders taken before 2pm will be delivered the following Monday (excluding Bank Holidays), unless the option to deliver Saturday AM has been selected.
We use the services of reputable couriers and always endevour to deliver by the appointed time on the appointed day. Unfortunately, the couriers on rare occasions fail to deliver on the appointed day or time. This is a rare occurence but because it does happen occasionally, the Seller cannot be held responsible for the late delivery of the Goods, and any costs incurred by the Buyer and tradesmen unable to work. We advise the Buyer to ensure receipt of the Goods before scheduling the work for any trades associated with the Goods.
Delivery of the Goods shall be made to the Buyer's address specified in the order and the Buyer shall make all the arrangements necessary to take delivery of the Goods whenever they are tendered for delivery.
Pallet orders are delivered within 2 to 3 days.
The Buyer agrees that Proof of Delivery provided to the Seller by the courier is sufficient evidence to establish that the Goods have been received by the Seller.
Deliveries must be signed for as proof of receipt unless, (before the Goods are despatched), the Buyer has given written permission for the Goods to be left without a signature - this written permission removes the liability for the Goods from the courier or Floorheatpro after delivery of the Goods.
Title and risk in the Goods shall pass to the Buyer upon delivery of the Goods.
Answers to the most common questions asked when looking to buy or install underfloor heating systems. We have broken the questions down in to 5 sections to make it easier for you to find the answer you are looking for.
Installation guidance is provided throughout and details can be found with each product listing for under tile mats, under tile cables & under laminate/wood foil mats.
Measuring up for your underfloor heating system is very straight forward, all you need to do is follow our 3 step guide and it will calculate the required coverage you will need for any of our underfloor heating systems..
FloorheatPro is a specialist in underfloor heating with its roots in electrical heating going back many years. We have the underfloor heating solution to meet your requirements whether it is a kitchen, conservatory, apartment block or small en-suite.
The Price Match Promise is the Floorheatpro way of saying you will always receive the best deal possible for your underfloor heating system.
We believe in keeping it simple so all our sales prices are genuine to match all rivals.
The only condition we make is the material being compared is of the same quality and has recognised international approvals such as UL (U.S.A.), SEMKO (Sweden) and FIMKO (Finland).
It is important to maintain the highest standards and with the supply base for underfloor heating increasing and sources from many different parts of the world, we can see some materials on the market that are new with a short track record and without the necessary approvals.