Why use a complete Premium undertile heating 150w mat kit

The 150w/m² FLOORHEATPRO underfloor heating mat kit is suitable for under tile heating in bathrooms, kitchens and most living areas within the home.

Under tile heating mat kits save you time and money because not only does the kit include your heating mat and FLOORTOUCH touchscreen thermostat but also QUICKHEAT, a dual purpose thermal floor paint that will prime and insulate your sub-floor at the same time. To ensure there is a good bond with tile adhesives all floors must be sealed and primed prior to tiling and/or fitting insulation boards. The contents of a kit offer real cost savings compared to purchasing items individually.

In addition, the 150 w/m² kit listings on this site provide the facility to select one of several thermostat options from a drop down menu, including a Manual Thermostat, Heatmiser neoStat-e system and Honeywell AUBE-TH232-AF-230.

When the floor and room are well insulated the 150w/m² system can also be used as your primary heat source. On concrete floors and depending on floor height restrictions, always attempt to install a thermal barrier of floor insulation just under the heating to gain maximum efficiency.

The largest single mat size is 12m² but in larger areas you can combine more than one mat to cover the floor area to be heated. A thermostat is normally rated at 16A (amps) and this is suitable to switch up to 3600 watts direct. This means 24m² is the maximum heated floor coverage with a 150w/m² system that can be controlled direct through a thermostat . However, it is still possible to heat a larger area than 24m² with a single thermostat, but in order to switch the amperage a contactor will be required as well as the thermostat. Alternatively, in larger areas the heating can be split into more than one heating zone, each zone with its own thermostat.