Why use a Floor heat pro undertile loose cable kit

FLOORHEATPRO loose cable kits meet the requirements of heating under tiled floors in smaller and awkward shaped rooms. Wide selection of sizes available to simplify design and installation.

The loose heating cable is rated at 10 w/m and is the same cable as used in the under tile heating mats. The cable comes on a reel and is loosely dispensed from the reel directly onto the floor with evenly spaced runs of cable to achieve the required watts density (w/m²) on the floor. This simple procedure is explained in the installation instructions. The minimum spacing is 50mm and this spacing will provide a floor loading (w/m²) of 200 w/m². The simple instructions show how the spacing can be varied for different loadings and how the length of cable can fit into the area to be heated.

Under tile loose cable kits save you time and money because not only does the kit include the loose cable on a reel and FLOORTOUCH touchscreen thermostat, but also QUICKHEAT, a dual purpose thermal floor paint that will prime and insulate your sub-floor at the same time. To ensure there is a good bond with tile adhesives all floors must be sealed and primed prior to tiling and/or fitting insulation boards. The contents of a kit offer real cost savings compared to purchasing items individually.

The FLOORHEATPRO loose cable listing also provides the facility to select the cable on its own or one of several thermostat options from a drop down menu, including a Manual Thermostat, Heatmiser neoStat-e system and Honeywell AUBE-TH232-AF-230.